LOCTITE Super Glue All Plastics, Clear, 2g+4ml
Packaging Size Make your selection 2g+4ml
Color Make your selection Clear
-
Advanced Bonding System: Two-part adhesive formula includes glue and activator to prime surfaces for a superior bond.
-
Fuses Hard-to-bond Plastics: Easily bonds to plastics such as polyethylene (PE), polypropylene (PP), and Polytetrafluoroethylene (PTFE).
-
Tremendous Strength: Highly-resistant, strong cyanoacrylate adhesive with no required clamping or mixing.
-
Sets In Seconds: Bonding system instantly dries transparent for invisible repairs.
-
Weatherproof: Resistant to water, most chemicals, and freezing temperatures.
LOCTITE All Plastics super glue: Rapid dual-action adhesive glue specially designed to work on plastic to form resilient, invisible bonds in seconds. It's a two-part cyanoacrylate adhesive that sets in seconds and develops tremendous strength, with as little as one drop. Especially designed for resilient bonding of plastic surfaces for strong and reliable solutions. It is resistant to water, most chemicals and freezing temperatures. Ideal for repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals & O-rings.
Ensure all surfaces to be bonded are clean and dry and close fitting. Avoid skin contact with the glue or activator. First apply one or two coatings of the activator to both surfaces. Ensure coverage is sufficient to treat the entire bonding area. Re-cap the activator pen tightly immediately after use. The activator must be allowed to dry and react with the surface for 1 to 2 minutes. Apply minimum quantity of LOCTITE SUPERGLUE All Plastics to one of the surfaces to be bonded. Bring parts together immediately and hold by hand pressure for at least 1 minute.
Leave undisturbed for 10 minutes or preferably overnight to allow full bond strength to develop. Avoid spillages and protect work surfaces. Remove cured residues of LOCTITE SUPERGLUE All Plastics. For best results, the bonds should be prepared at room temperature (15-30°C) and a minimum 30% relative humidity.
For optimum product life, wipe the nozzle with a tissue to remove excess adhesive, replace cap and store the pack in a cool, dry place.