Ugly mouldy joints?
Tired of looking at that yellow, ugly, old sealant… but put off by the thought of scraping it away? RE-NEW it in the easiest way possible! Apply new fresh smooth sealant straight over old joints.
Zero skills needed, done in minutes.
RE-NEW is designed for the simplest and most perfect applications. The new improved device makes it easy to control the product flow for a smooth and clean result.
Apply directly over old joints
Auto-smooth nozzle
Mould resistant
No extra tools
Ensure the surfaces are clean and dry. If the old silicone is too mouldy use an anti-mould spray.
Remove the cap and position the applicator at an angle to the joint, so that the edges of the applicator have full contact with both sides of the joint.
Lightly squeeze and slowly push the bottle forward maintaining the nozzle at the same angle.
Periodically clean the excess product on the nozzle during application to ensure a clean finish.
Repeat the process without squeezing for a perfect finish.
You can do small corrections with a wet paper tissue.
Remove immediately with a damp cloth and start over!
Allow at least 6 hours to dry before using the shower.
Tiled areas (wall to wall connection)
Bathtub to tiled wall
Tiled areas (wall to floor connection)
Toilet to tiled wall
Sink to tiled wall
Three years ago I moved to a new flat and my dad helped me change the silicone sealant in the bathroom. I remember being shocked how long it took to remove the old sealant.
Saw RE-NEW during my last visit at the DIY shop and decided to buy it to refresh the sealant in my shower which was getting a bit mouldy. I was literally done in minutes! Great product!
Thomas M
Ever since I got my baby girl Emma, I’ve become more obsessed with hygiene at home. I can’t afford calling someone in every time I need to refresh my sealant and I don’t have the time or -to be honest- the skills to do it myself. I’ve always had 2 left hands when it comes to DIYing 😊. A friend recommended RE-NEW. I was a bit skeptical at first, but after using it, I am very satisfied. What I like the most, is that you can easily remove Re-new with a wet cloth if your first go is rubbish and just start over again. Don’t be discouraged if you don’t get it right from the first try. In the end it’s much faster than replacing the sealant.
Maria S
Three years ago I moved to a new flat and my dad helped me change the silicone sealant in the bathroom. I remember being shocked how long it took to remove the old sealant.
Saw RE-NEW during my last visit at the DIY shop and decided to buy it to refresh the sealant in my shower which was getting a bit mouldy. I was literally done in minutes! Great product!
Vanessa L
RE-NEW IT TODAY!