We’ll show you how to glue glass to glass like an expert in this article. The best adhesives and methods to get your job done right.
Gluing glass together can be a challenge because many types of glue will not bond to its smooth, non-porous surface. Even some super glues will not adhere to glass. Not to worry, though; there are adhesives that will work for this application, and we’ll give a brief overview here. Then we’ll list some suggestions on the best glues for your projects.
A specialty glass repair glue is best for repairing small items and household goods such as wine glass stems, knick-knacks, and other indoor items. Choose one that dries clear, works with all types of glass, and is dishwasher safe.
If you have a larger project in mind or need an adhesive that will fill the gaps where small shards of glass may be missing, then epoxy is probably your best bet. Epoxy can act as an adhesive, filler, or laminate to repair surface issues and scratches.
Most epoxies dry clear but can be tinted to match coloured glass.
A clear construction adhesive formulated for glass is the best choice for large-scale projects such as plate glass, large windows, and specialty projects. Make sure the glue you choose is rated for outdoor use if it will be exposed to the elements.
Here are the basic steps to glue glass with a glass adhesive. Using epoxy is similar but remember the additional step of mixing the two parts of the epoxy on a disposable surface before you begin.
- Wash the surfaces to be bonded with glass cleaner or soap and water. Allow all materials to dry completely before beginning your repair.
- Ensure all parts are close-fitting.
- Apply the adhesive sparingly to one surface. Just one drop of adhesive will cover up to 6.5cm2 of glass.
- Press the parts together immediately and hold them in place for one minute or until the bond begins to hold.
- Leave overnight for full cure. The item will be dishwasher safe in one week.
Loctite Super Glue Glass is perfect for little fixes around the house. It bonds in seconds to glass, including crystal, stained or tinted glass, and blown glass. Plus, it’s water and dishwasher safe.
When a gap-filling heavy-duty adhesive is needed, call on Loctite Epoxy Gel. Once the resin and hardener are mixed, a rigid, super-strong bond forms in just six minutes. The gel formula will not run or drip and doesn’t shrink. It bonds to a wide range of materials, including glass, and can be tinted to match the surrounding material.
If you need a high-viscosity adhesive that will hold up to vibration, impact, UV light, and moisture, Loctite Extreme Gel is for you. This glue is very versatile. It fills gaps, will stand up to harsh conditions, and will bond to almost any material. Extreme Gel dries quickly and cures to a transparent finish.
Share your own projects