- Wash the broken area with water (avoid using detergent as this can affect the glue's performance) and dry thoroughly. Ensure that the surfaces to be joined are close fitting.
- Carefully squeeze a small drop onto one of the broken parts. Press both surfaces together firmly and wait until they is set.
- Do not move until the surfaces are set. Don’t worry if there is some excess glue, this can be easily removed once dry (see point 5)
- Allow at least 1-2 hours to fully cure before using. For best results leave overnight.
- Once dry, if there is any excess residue, gently wipe with a tissue dipped in Loctite Glue Remover or nail varnish remover containing acetone.
- Replace the cap immediately and store the glue upright in a cool dry place.